Architecture is a desperate enterprise. This is because in many ways designing is a race against time. As a designer you are always time poor. Deadlines are imposed externally. The more time you send on the design the more you burn up your fees. Fees that sometimes have already been cut to the bone. Whats worse is that it takes time to design properly. It is a labour intensive exercise that involves the consideration of different options and the exploration of different design pathways.
Most architects are always designing in a blind panic and this is what you need to get good at. But: too many architects procrastinate and too many architecture students leave things to the last minute. Finally, the procrastination can inevitably give way to blind panic. Its 5 days to go and you still need to do the layout and print ! OMG !!
As it is almost the end of semester here in my hemisphere I thought I would do a special Surviving the Design Studio blog outside of my normal weekly blogging routine. So here are a few last minute survival points to think about. Enjoy.
Hyperventilating and multitasking and not knowing where to start can lead to conflicted priorities. Its best to sit down and to methodically plan you way out of things. Make a list. Write down all the things you need to do. Prioritise the list. Decide what you can’t do. Yes everything is interlinked but you can only do one thing at a time. Put the prioritised list next to you computer and every time you start to panic look at it and stay calm.
Avoid anxiety and your own inner critical negative voice. Be mindful as much as you can.
2. Work back from the end
Know what your layout is (and I don’t mean the layout of your plans). Know what drawings you are going to pin up or publish at the end and how these drawings contribute and support your argument. If you know what you are going to present at the end then you will know more accurately what you have to do. Do an actual mock up and stick it on a wall and see how it looks. Read this previous blog of mine on layout and this one on verbal presentation.
Timing is critical and working back form the end helps. Too often architects forget to allow for the print queue. There is nothing worse than having a great design but missing the deadline set by the project manager or the studio submission.
3. Plan and resolve your way through problems
The quicker you can resolve issues around your design the better. At the end of the project it usually the medium and little things that need to be resolved. What is the profile of the roof or volume, where should openings or windows go, what happens at the entry conditions, is the circulation pattern easily communicated. Resolve as much as you can and as quickly as you can.These are design development decisions. If you think you are getting into a bind about anyone decision. Just make a choice. Its your design.
Know when to design and then when to just produce the images.
4. Figure out what you can and cant do
You cant do everything. Use a prioritised list and a final layout plan to figure out what you need to do.D hat way you won t get sucked into the computer finessing things that you don’t need to worry about and making design development decisions. Concentrate, and complete, the hardest and most time consuming elements of the design and presentation first. Leaving the hard and time consuming things to last is just another form of procrastination.
Your mantra at this stage should be. Resolve, Resolve and Resolve; one issue at a time.
5. Look after yourself
Staying up all night to 5 in the morning hyped up on mother or red bull or coke or amphetamines is really really bad. After 1 am your productivity will drop. It doesn’t matter if you are in your twenties. Take breaks, eat properly and know when it is time to sleep. Get some exercise.
If you are really strapped for time the best you can do is work form 9 am to around 1 am with an hour for lunch and hour for dinner. Then make sure you get 6, maybe 7 to 8 hours sleep. It will help you to make better decisions.
Know when it is not worth it. At the end of the day it is not worth sacrificing your mental health for a better than average pass or wining the selected competition. There will be other design studios and other projects. Stop and get help if you feel your mental health is suffering.
6. Get help
Get your friends in. Get them to do stuff. Get them to lend you another eye when you are not sure about things. Ask your tutor, or a team member, about design and design development decisions. A good tutor or team member will relish the questions and help you to resolve issues more quickly rather than you agonise over something for hours.
Discussing your project s concept and design process with others even at this late stage will help you to clarify and prioritise what you need to do to finish it.
7. When bad things go wrong problem solve and replan again
There will be glitches of course. Once I printed out all of my final thesis drawings and looked at them only to realise they were all wrong. The line weights combined with the particular experimental printing process I employed led to unreadable drawings. It was a total disaster. The best thing to do was to have a sleep and not to panic.
After the sleep I could think straight and look at my drawings with a more evaluative eye. I then replanned my production technique and after a few days had reprinted my drawings. I lost time, but on the second print run my drawings were much better (see 2 above).
8. Don’t sit on the computer for the sake of it
If you are sitting there looking at the screen and not getting much done it’s time to move. Efficiency is good and sometimes that means taking breaks every so often. Don’t deceive yourself by thinking that all because you are sitting in front of the computer you are getting things done. Move on to another task.
9. If it looks good it is good
The above statement is my cardinal rule for deciding when to move onto the next task or micro task. If you are running out of time you need to suspend your own inner critic and inner perfectionist. If it looks good then use that and move onto the next task. There is no point having a great and perfect render if the rest of your drawings and images are awful.
Getting the balance right between different images and representation of your design at the end of semester or project is what will count. You are producing an integrated and wholistic design vision. Making one thing superbly refined at the expense of everything else is always remarked upon by the jury critics. But you will never win the competition if you do this. Jury critics usually want to see that how well your design proposal relates to everything.
Of course it may be too late for you to get the balance right. between the design of different elements on your final images. You may have just run out of time or read this blog too late in the day. If that’s then case you may need to make sure a couple of things are so good that you cant fail. This is what I would call a salvage operation.
10. Take notes
Take notes as you work and different justifications, rationale or aspects of your project spring to mind. Use these notes to frame and articulate your own arguments if and when you have to stand in front of your project and discuss it. You can also use the notes to help you include any explanatory or annotative text that may need to go onto the drawings. These notes will also help you to take lessons and insights onto your next project.
Don’t try and constantly second guess your tutor or the critics. Consider what they might want and then craft your response to it. Use the working notes to do this.
All of the above should help if you are in desperation mode and you have kissed your significant others goodbye. You may think you will never see them again as you go into the vortex of the final days of a design project. But it will soon be over and then of course there is always the next project and it is actually the next project that all architects yearn for.